Skip to main content

The CDK Construct Library for AWS::ServiceCatalogAppRegistry

Project description

AWS ServiceCatalogAppRegistry Construct Library

---

cdk-constructs: Experimental

The APIs of higher level constructs in this module are experimental and under active development. They are subject to non-backward compatible changes or removal in any future version. These are not subject to the Semantic Versioning model and breaking changes will be announced in the release notes. This means that while you may use them, you may need to update your source code when upgrading to a newer version of this package.


AWS Service Catalog App Registry enables organizations to create and manage repositories of applications and associated resources.

Table Of Contents

The @aws-cdk/aws-servicecatalogappregistry package contains resources that enable users to automate governance and management of their AWS resources at scale.

import aws_cdk.aws_servicecatalogappregistry_alpha as appreg

Application

An AppRegistry application enables you to define your applications and associated resources. The application name must be unique at the account level and it's immutable.

application = appreg.Application(self, "MyFirstApplication",
    application_name="MyFirstApplicationName",
    description="description for my application"
)

An application that has been created outside of the stack can be imported into your CDK app. Applications can be imported by their ARN via the Application.fromApplicationArn() API:

imported_application = appreg.Application.from_application_arn(self, "MyImportedApplication", "arn:aws:servicecatalog:us-east-1:012345678910:/applications/0aqmvxvgmry0ecc4mjhwypun6i")

Application-Associator

ApplicationAssociator defines an AppRegistry application to contain all the stacks in deployed through your cdk package. This helps to manage all the cdk deployed resources.

Create a new application to associate all the stacks in the cdk.App scope

If you want to create an Application named MyAssociatedApplication in account 123456789012 and region us-east-1 and want to associate all stacks in the App scope to MyAssociatedApplication, then use as shown in the example below:

app = App()
associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.create_application_stack(
        application_name="MyAssociatedApplication",
        # 'Application containing stacks deployed via CDK.' is the default
        application_description="Associated Application description",
        stack_name="MyAssociatedApplicationStack",
        # AWS Account and Region that are implied by the current CLI configuration is the default
        env=Environment(account="123456789012", region="us-east-1")
    )]
)

This will create a stack MyAssociatedApplicationStack containing an application MyAssociatedApplication with the TagKey as managedBy and TagValue as CDK_Application_Associator.

By default, the stack will have System Managed Application Manager console URL as its output for the application created. If you want to remove the output, then use as shown in the example below:

app = App()
associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.create_application_stack(
        application_name="MyAssociatedApplication",
        # 'Application containing stacks deployed via CDK.' is the default
        application_description="Associated Application description",
        stack_name="MyAssociatedApplicationStack",
        # Disables emitting Application Manager url as output
        emit_application_manager_url_as_output=False,
        # AWS Account and Region that are implied by the current CLI configuration is the default
        env=Environment(account="123456789012", region="us-east-1")
    )]
)

Import existing application to associate all the stacks in the cdk.App scope

If you want to re-use an existing Application with ARN: arn:aws:servicecatalog:us-east-1:123456789012:/applications/applicationId and want to associate all stacks in the App scope to your imported application, then use as shown in the example below:

app = App()
associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.existing_application_from_arn(
        application_arn_value="arn:aws:servicecatalog:us-east-1:123456789012:/applications/applicationId",
        stack_name="MyAssociatedApplicationStack"
    )]
)

Associate attribute group to the application used by ApplicationAssociator

If you want to associate an Attribute Group with application created by ApplicationAssociator, then use as shown in the example below:

import aws_cdk as cdk


app = App()

associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.create_application_stack(
        application_name="MyAssociatedApplication",
        # 'Application containing stacks deployed via CDK.' is the default
        application_description="Associated Application description",
        stack_name="MyAssociatedApplicationStack",
        # AWS Account and Region that are implied by the current CLI configuration is the default
        env=cdk.Environment(account="123456789012", region="us-east-1")
    )]
)

# Associate application to the attribute group.
associated_app.app_registry_application.add_attribute_group("MyAttributeGroup",
    attribute_group_name="MyAttributeGroupName",
    description="Test attribute group",
    attributes={}
)

Associate stacks deployed by CDK pipelines

If you are using CDK Pipelines to deploy your application, the application stacks will be inside Stages, and ApplicationAssociator will not be able to find them. Call associateStage on each Stage object before adding it to the Pipeline, as shown in the example below:

import aws_cdk as cdk
import aws_cdk.pipelines as codepipeline
import aws_cdk.aws_codecommit as codecommit
# repo: codecommit.Repository
# pipeline: codepipeline.CodePipeline
# beta: cdk.Stage

class ApplicationPipelineStack(cdk.Stack):
    def __init__(self, scope, id, *, application, description=None, env=None, stackName=None, tags=None, synthesizer=None, terminationProtection=None, analyticsReporting=None, crossRegionReferences=None, permissionsBoundary=None):
        super().__init__(scope, id, application=application, description=description, env=env, stackName=stackName, tags=tags, synthesizer=synthesizer, terminationProtection=terminationProtection, analyticsReporting=analyticsReporting, crossRegionReferences=crossRegionReferences, permissionsBoundary=permissionsBoundary)

        # associate the stage to application associator.
        application.associate_stage(beta)
        pipeline.add_stage(beta)

app = App()
associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.create_application_stack(
        application_name="MyPipelineAssociatedApplication",
        stack_name="MyPipelineAssociatedApplicationStack",
        env=cdk.Environment(account="123456789012", region="us-east-1")
    )]
)

cdk_pipeline = ApplicationPipelineStack(app, "CDKApplicationPipelineStack",
    application=associated_app,
    env=cdk.Environment(account="123456789012", region="us-east-1")
)

Associate cross-account stack

By default, ApplicationAssociator will not perform cross-account stack associations with the target Application, to avoid deployment failures for accounts which have not been setup for cross-account associations. To enable cross-account stack associations, make sure all accounts are in the same organization as the target Application's account and that resource sharing is enabled within the organization. If you wish to turn on cross-account sharing and associations, set the associateCrossAccountStacks field to true, as shown in the example below:

app = App()
associated_app = appreg.ApplicationAssociator(app, "AssociatedApplication",
    applications=[appreg.TargetApplication.create_application_stack(
        associate_cross_account_stacks=True,
        application_name="MyAssociatedApplication",
        env=Environment(account="123456789012", region="us-east-1")
    )]
)

Associate cross-region stack

Currently, cross-region stack association is not supported.

Attribute Group

An AppRegistry attribute group acts as a container for user-defined attributes for an application. Metadata is attached in a machine-readable format to integrate with automated workflows and tools. The attribute group name must be unique at the account level and it's immutable.

attribute_group = appreg.AttributeGroup(self, "MyFirstAttributeGroup",
    attribute_group_name="MyFirstAttributeGroupName",
    description="description for my attribute group",  # the description is optional,
    attributes={
        "project": "foo",
        "team": ["member1", "member2", "member3"],
        "public": False,
        "stages": {
            "alpha": "complete",
            "beta": "incomplete",
            "release": "not started"
        }
    }
)

An attribute group that has been created outside of the stack can be imported into your CDK app. Attribute groups can be imported by their ARN via the AttributeGroup.fromAttributeGroupArn() API:

imported_attribute_group = appreg.AttributeGroup.from_attribute_group_arn(self, "MyImportedAttrGroup", "arn:aws:servicecatalog:us-east-1:012345678910:/attribute-groups/0aqmvxvgmry0ecc4mjhwypun6i")

Associations

You can associate your appregistry application with attribute groups and resources. Resources are CloudFormation stacks that you can associate with an application to group relevant stacks together to enable metadata rich insights into your applications and resources. A Cloudformation stack can only be associated with one appregistry application. If a stack is associated with multiple applications in your app or is already associated with one, CDK will fail at deploy time.

Associating application with a new attribute group

You can create and associate an attribute group to an application with the addAttributeGroup() API:

# application: appreg.Application
# attribute_group: appreg.AttributeGroup

application.add_attribute_group("MyAttributeGroupId",
    attribute_group_name="MyAttributeGroupName",
    description="Test attribute group",
    attributes={}
)

Associating an attribute group with application

You can associate an application with an attribute group with associateWith:

# application: appreg.Application
# attribute_group: appreg.AttributeGroup

attribute_group.associate_with(application)

Associating application with a Stack

You can associate a stack with an application with the associateApplicationWithStack() API:

# application: appreg.Application
app = App()
my_stack = Stack(app, "MyStack")
application.associate_application_with_stack(my_stack)

Sharing

You can share your AppRegistry applications and attribute groups with AWS Organizations, Organizational Units (OUs), AWS accounts within an organization, as well as IAM roles and users. AppRegistry requires that AWS Organizations is enabled in an account before deploying a share of an application or attribute group.

Sharing an application

import aws_cdk.aws_iam as iam
# application: appreg.Application
# my_role: iam.IRole
# my_user: iam.IUser

application.share_application("MyShareId",
    name="MyShare",
    accounts=["123456789012"],
    organization_arns=["arn:aws:organizations::123456789012:organization/o-my-org-id"],
    roles=[my_role],
    users=[my_user]
)

E.g., sharing an application with multiple accounts and allowing the accounts to associate resources to the application.

import aws_cdk.aws_iam as iam
# application: appreg.Application

application.share_application("MyShareId",
    name="MyShare",
    accounts=["123456789012", "234567890123"],
    share_permission=appreg.SharePermission.ALLOW_ACCESS
)

Sharing an attribute group

import aws_cdk.aws_iam as iam
# attribute_group: appreg.AttributeGroup
# my_role: iam.IRole
# my_user: iam.IUser

attribute_group.share_attribute_group("MyShareId",
    name="MyShare",
    accounts=["123456789012"],
    organization_arns=["arn:aws:organizations::123456789012:organization/o-my-org-id"],
    roles=[my_role],
    users=[my_user]
)

E.g., sharing an application with multiple accounts and allowing the accounts to associate applications to the attribute group.

import aws_cdk.aws_iam as iam
# attribute_group: appreg.AttributeGroup

attribute_group.share_attribute_group("MyShareId",
    name="MyShare",
    accounts=["123456789012", "234567890123"],
    share_permission=appreg.SharePermission.ALLOW_ACCESS
)

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

Built Distribution

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page