adafruit-circuitpython-esp-atcontrol 0.11.5

CircuitPython driver for communicating using ESP AT command set.

Introduction

This library is no longer supported! The library is being left available for continued usage, however, Adafruit is no longer supporting it.

Use the ESP AT command sent to communicate with the Interwebs. Its slow, but works to get data into CircuitPython

Command set: https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf

Examples: https://www.espressif.com/sites/default/files/documentation/4b-esp8266_at_command_examples_en.pdf

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Adafruit CircuitPython ConnectionManager

• Adafruit CircuitPython Requests

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-esp-atcontrol

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-esp-atcontrol

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-esp-atcontrol

Usage Example

See examples folder for full demos

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.