adafruit-circuitpython-si7021 3.3.1

CircuitPython library for SI7021 Temperature and Humidity Sensor.

Introduction

CircuitPython module for use with the SI7021 Temperature and Humidity Sensor.

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-si7021

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-si7021

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-si7021

Usage Notes

Of course, you must import the library to use it:

import adafruit_si7021

This driver takes an instantiated and active I2C object (from the busio or the bitbangio library) as an argument to its constructor. The way to create an I2C object depends on the board you are using. For boards with labeled SCL and SDA pins, you can:

from busio import I2C
from board import SCL, SDA

i2c = I2C(SCL, SDA)

Once you have created the I2C interface object, you can use it to instantiate the sensor object:

sensor = adafruit_si7021.SI7021(i2c)

And then you can start measuring the temperature and humidity:

print(sensor.temperature)
print(sensor.relative_humidity)

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.